Build Stargates

Build two Stargates on the same network to connect destinations. You need Mechanic III, access to the network, and permission to build across the whole gate.

1. Create or join a network.
2. Build an obsidian frame with two blocks across the top and bottom and three blocks high on each side. Leave the two-wide, three-high opening empty.
3. Place a wall button on one middle side block. Place a wall sign on the opposite middle side block, facing the same direction as the button.
4. Write the gate name on sign line 1 and the network name on line 3. Wait for the Stargate <name> created. message to confirm it was saved.
5. Build a second gate with a different name on the same network. Right-click the first sign to cycle to it, press the button, and walk into the open portal.

For example, create a public network named HomeRoad, then build gates named Home and Mine with HomeRoad on line 3 of each sign. Select Mine at Home to travel there, and select Home at Mine to return.

Use /stargate remove <network> <gate> when authorized to remove a registered gate. Remove it before changing its blocks or sign. If travel fails, check your network access, the frame and the destination.