Skip to content

A place to build, explore, and catch up.
Server IP: ts-mc.net
Minecraft Java + Bedrock

Menu

Elevators and moving structures

Mechanic II can build these structures. Anyone with interaction permission can use them. Write each tag on line 2 of its sign.

Place signs in the same vertical column, no more than 128 blocks apart. Use [Lift Up] to travel upward, [Lift Down] to travel downward, or [Lift] for a stop. Right-click the appropriate sign to travel to the next stop in that direction.

Two vertically aligned lift signs with a safe platform at each stop
Align the signs vertically and leave room to stand at each floor.

Download annotated image

The signs move the player between aligned stops.

Download annotated video

  1. Place two standing signs six blocks apart in a straight line, facing away from each other.
  2. Put an oak plank directly below each sign and write [Bridge] on line 2 of each. The second sign links the ends.
  3. If the five spaces between the end planks are empty, right-click a sign while holding five oak planks to supply the moving section.
  4. Right-click with an empty hand to toggle the walkway. Add matching planks beside both ends to widen it by up to two blocks on each side.
The moving bridge is retracted, leaving a gap between its matching ends
Matching Bridge signs control the gap between the fixed ends.

Download annotated image

Bridge planks span the five spaces between its fixed ends
Activating either sign extends the walkway across the gap.

Download annotated image

Right-click either Bridge sign to toggle the moving section.

Download annotated video

The ends must match in material and width. Bridges can extend up to 32 blocks and accept whole blocks such as planks, stone, sandstone and glass.

For a one-block-wide door, stack a [Door Up] sign, an oak plank, three empty spaces, another oak plank, and a [Door Down] sign in one vertical column. The second sign links the ends. Right-click either sign to toggle the moving section. Matching blocks can widen a door by up to two blocks on each side; its maximum length is 12 blocks.

Oak planks fill the moving section between the Door Up and Door Down ends
Matching signs and base blocks define the closed door.

Download annotated image

The three moving oak planks are removed, leaving an open doorway between the fixed ends
Opening the door stores its moving blocks for the next closing.

Download annotated image

Build a three-wide wall of oak fences six blocks high on solid ground. Place a sign within three blocks of the fence columns and write [Gate] on line 2. Right-click to raise or lower the gate. The top fence of each column remains in place. Gates support up to 16 columns and 12 blocks in height, using fences, iron bars or glass panes.

A closed three-wide oak fence gate between stone posts
Each fence column reaches the ground when the gate is closed.

Download annotated image

The raised gate leaves an open passage while the top fence row stays in place
Opening the gate removes the lower fences and keeps the top of each column.

Download annotated image

Redstone power opens bridges, doors and gates; loss of power closes them. Leave the moving area clear, and make sure you have permission to build and interact across the structure. See Mechanisms for more builds.

Opening a moving structure stores its removed blocks for the next closing. If a bridge or door starts empty, supply matching blocks first by right-clicking its sign while holding them.